Assoc.Prof.Dr.Mongkol Mongkolwongroj’s Profile

Office Location: The 55-Year Chalermprakiat Building, 4th floor
Phone: 02-329-8271
Email: kmmongko@gmail.com
Education B. Eng.(Hons.) Mech. Eng., King Mongkut?s University of Technology
Thonburi. THAILAND.
Ph.D. (Mech. Eng.) University of Wisconsin-Madison, USA.

Professional Experience

: Associate professor; College of Advanced Manufacturing Innovation,
King Mongkut’s Institute of Technology Ladkrabang
: Head of Mechanical Engineering Department, Faculty of Engineering,
King Mongkut’s Institute of Technology Ladkrabang from 1986-1994
: Board member committee, Council of Engineers, Thailand
: Board committee, the Vocational Education Commission,
Ministry of Education Thailand from 2012 to 2018
: Senior Professional Engineer in Mechanical Engineering, Council of Engineers

AWARDS and HONORS

: 2009 TSME Outstanding Paper Award, MENETT-23
: Best Researcher Awards, DST- CON-2009
: 2008 Best Journal Paper Award, ASME Journal of Tribology, USA
: Best Presentation Award in 2005 International Conference on
Control, Automation and Systems (ICCAS2005) for the paper entitled
?Implementation of Fuzzy Logic Control for Air Conditioning Systems?,
The Institute of Control Automation and System Engineers, Korea, June, 2005.
: Royal Thai Government Scholarship from 1980 to 1985.

Research Interests

: Tribology and Mechanics
: Optimum Design of Mechanical Engineering Systems
: Refrigeration and Air Conditioning Systems using Natural refrigerants

Recent Publication
Journal:

1.Daocharoenporn, M. Mongkolwongrojn, S. Kulkarni, A. A. Shabana, “Prediction of the Pantograph/Catenary Wear using Nonlinear Multibody System Dynamic Algorithms” Transactions of ASME, Journal of Tribology, Vol.141(5), 051603-051603-13, 2019.

2. Mongkolwongrojn, M., Panichakorn, J.,”Effect of Micro-Particle on Rough Surface Spur Gears under TEHL with NonNewtonian Lubricant”, JSME, Journal of Advanced Mechanical Design, Systems and Manufacturing, Vol.10, No 9,
PP. 1-12, 2016.
3. Mongkolwongrojn, M., Rattapasakorn, S., “Effect of nanoparticle additives on rough surface cylinder in line contact under TEHL with non-Newtonian lubricant”, JSME, Journal of Advanced Mechanical Design, Systems and Manufacturing, Vol. 8, No. 3, PP. 1-14, 2014.

4. Mongkolwongrojn, M., Jeenkour, P., “Analysis of a Flexible Web on a Groove Concave Surface under Soft EHL”, Tribology International, Vol. 61, pp.194-204, 2013.
5. Mongkolwongrojn, M., Panichakorn, J., “TEHL Analysis of Rough Surface Spur Gears with Non-Newtonian Lubricants under Sudden Overloads”, JSME, Journal of Advanced Mechanical Design, Systems and Manufacturing, Vol.6, No 7,
PP. 1031-1045, 2012.
6. Mongkolwongrojn, M., Aiumpornsin,C., “Stability Analysis of Rough Journal Bearings under TEHL with Non-Newtonian Lubricants”, Tribology International, Vol.43,
pp.1027-1034, 2010.
7. Mongkolwongrojn, M., Wongseedakaew, K., Kennedy, F. E., “Transient Elastohydrodynamic Lubrication in Artificial Knee Joint with non-Newtonian Fluids”, Tribology International, Vol.43, pp. 1017-1026, 2010.
8. Hashimoto, H., Jeenkour, P., Mongkolwongrojn, M., “Optimum Winding Tension and Nip-Load into Wound Webs for Protecting Wrinkles and Slippage”, JSME Journal oh Advanced Mechanical Design, Systems and Manufacturing, Vol. 4, No.1, PP.214-225, 2010.
9. Kanlayasiri, K., Mongkolwongrojn, M., Ariga, T., “Influence of Indium Addition on Characteristics of Sn-0.3Ag-0.7Cu Solder Alloy”, Journal o f Alloy and Compound, Vol.485, pp. 225-230, 2009.
10. Mongkolwongrojn, M., Wongseedakaew, K., Kennedy, F. E., “Elastohydrodynamic Lubrication of Rough Surfaces under Oscillatory Line Contact with NonNewtonian Lubricant”, Tribology Transactions, Vol. 51, No.5, PP.552-561, 2008.
11. Kennedy, F. E., Van Citters, D. W., Wongseedakaew, K., M. Mongkolwongrojn, “Lubrication and Wear of Artificial Knee Joint Materials in a Rolling/Sliding Tribotester”, Trans. of the ASME Journal of Tribology, Vol.129, PP.326-335, 2007.
12. M. Mongkolwongrojn, C. Aiumpornsin, K. Thammakosol, “Theoretical Investigation in Thermoelastohydrodynamic Lubrication with Non-Newtonian Lubricants Under Sudden Load Change”, Trans. of the ASME Journal of Tribology, Vol.128, PP.771-777, 2006.

Conference:
1. Mongkolwongrojn, M., Panichakorn, J., “Effect of Solid Particles on Rough Surface Spur Gears under TEHL with NonNewtonian Lubricant”, STLE Tribology New Frontiers Conference, Denver Colorado, USA, Oct 2015.
2. Mongkolwongrojn, M., Kuanoon, K. “Effect of Slider Geometry Change on Helium Fillrd HDD”, The 4th International Conference on Mechatronics and Intelligent Materials, 2014.
3. Mongkolwongrojn, M., Kuanoon, K., “Theoretical Analysis of Flying Characteristics for Air-Helium Filled HDD”, The 4th International Conference on Mechatronics and Intelligent Materials, 2014.
4. W. Gumnuang, C. Aiumpornsin, M. Mongkolwongrojn, M. “Characteristics of Misalignment Journal Bearing with Non-Newtonian Carreau Fluids”, The 4th International Conference on Mechanical Engineering, ICOME-2013
5. Suntawiworn, S., Mongkolwongrojn, M., “Influence of Heating Temperature Fluctuation on Flying Height under EAMR Conditions”, DST-CON-2011
6. J. Bamrungwong, M. Mongkolwongrojn, “Effect of the Spacer Key on HAS”, DST-CON 2010.
7. W. Ponthong, M. Mongkolwongrojn, “Influence of Roughness on Static Characteristics of Slider Head under Severe Conditions”, DST-CON 2010.
8. R. Boonpuang, M. Mongkolwongrojn, “Theoretical Analysis of Air Bearing under Discrete Track Recording Media in Ultra Low Head Sliders”, DST-CON 2010.
9. W. Khamon, M. Mongkolwongrojn, “Effect of the Parameters of Pole Tip on Static Characteristics of Flat Head Sliders”, DST-CON 2010.
10. C. Aiumpornsin, M. Mongkolwongrojn, M. “Thermoelastohydrodynamic Analysis of Journal Bearing with Non-Newtonian Carreau Fluids”, The ASME-JSME Join Tribology Conference, IJTC 2009.